Characteristic:
Control up to 3 milling machines.
Apply to:
Industries that require accurate concentration of cutting fluid anddesire for cutting fluid saving, precision machining components.
Industrial applications:
Aerospace industry,Machine components,
Automotive and bicycle industries,
Precision machining, etc.
Individually set the specified concentration of each tank.
Automatically calculate and replenish cutting fluid and control concentration.
Automatically replenish the liquid.
Easy to operate and input the concentration on the touch panel and accurately mix the concentration.
Malfunction alarm of oil shortage, water shortage, troubleshooting.
No consumable.
Smart auto control mode, lower labor management cost.
AUTO mode smart automatic control, saving time of cutting fluid management.
Unmanned 24-hour production to improve efficiency.
Unmanned 24-hour production to improve efficiency.
Unmanned 24-hour production to improve efficiency.
Application range
CNC lathe
CNC grinder
CNC milling machine
CNC integrated processing machine
CNC grinder
Cutting fluid replenishment requirements...etc.
Specification
7” LCD Touch control panel
Voltage:110~220V
Pipe Diameter : 20mm(½”)
Size: 680*680*1450mm
Size: 680*680*1450mm
Size: 680*680*1450mm
Function
Set concentration. / Manually set concentration.
Auto mode. / Automatically calculate and replenish cutting fluid and control concentration.
Concentration detection. /Automatically detect concentration of processing fluid.
Ozone disinfection. / ON/OFF
Manual mode. / Add cutting fluid manually
Manual / water. / Add water manually.
Manual / fluid. / Add cutting fluid manually.
專利
新型專利,仿冒必究
發明專利,仿冒必究
選配:
界面轉換器(發送E-mail警試)
送電子郵件通知，提醒人員進行補充外部油桶、異常狀態告知。
透過閃爍LED燈、蜂鳴器或電子郵件通知相關人員。
PH值傳感器
隨時監控切削液的最佳PH值為8～10。 如果切削液的pH 值高於或低於推薦範圍，它可能會降解或變質。 一旦降解或腐爛，細菌就會在液體中生長，增加腐蝕和氣味等問題的可能性。
Benefit
15%-30%
Extend cutting blade life and reduce costs by
90%-95%
Reduce cutting fluid costs by
40%-60%
Extend cutting fluid life by
80%~90%
Lower management overhead by
Model: AFS-3
Processing sketch:
After pumping the internal cutting fluid back and forth through the drain pipe,automatically calculate the cutting fluid concentration inside the CNC machineand water level, and then supplemented by automatic cutting fluidthe system transmits the required concentration of cutting fluid and waterto achieve fully automated concentration and water level control.
Installation
Pipelines need to be installed on site to provide automatic replenishment.
Comparison Chart
